Mezzanine Floor Lifter

See more examples... 1 | 2 | 3 | 4 | 5 | 6 | Mezzanine Floor Enquiry Form

Manufacture and install 1 off External guard system for both upper and lower floors

• The lower level will be totally enclosed from floor to the underside of the Mezzanine
• The upper level will be enclosed on 2 sides fixed rails + 2 sides of the platform saloon style gates
• Both enclosures will feature a single out-ward opening gate and will be fitted with an electrical interlock to prevent opening when the lift is not parked.
• Both enclosures will be in-filled with mesh to prevent access to the lift.

Design, manufacture and install 1 off mast-type Mezzanine Goods Lift to be integrated into a new mezzanine floor system

• The lift will be constructed using a single mast which must be bolted to the building block-work to provide additional support to the load legs.
• The lift platform will measure approximately 1500mm wide by 1500mm deep and will close down over the legs
• The platform will feature 1100mm high rails on all sides and a single outwards opening gate on the right hand side of the mast. The gate will be spring loaded and will lock with a gravity system but will also be sensed to prevent platform movement if the gate is open.
• The clear working platform area will be 1350mm x 1350mm
• The platform will close to the floor with a 60mm lowered height and have a total raised height of 3630mm
• The maximum lift height will be governed by a limit switch system to ensure that the platform parks with the mezzanine upper floor.
• The platform will be supplied with a loading ramp to be permanently fixed to the ground floor measuring 1200mm wide by 700mm long giving a gradient of 8.57%
• The hydraulic power pack and electrical system will be housed in a separate wall mounted box at ground level.
• Control points will be positioned at both ground and upper floor levels. Both points will feature latching call buttons and emergency stop controls.
• Power requirement: 415V 3 phase + Neutral via 10amp isolator (Supplied by customer)
• Motor specification: 0.8Kw 3phase 415V with 3ltr reservoir
• Maximum lift capacity will be 500Kg

See more examples... 1 | 2 | 3 | 4 | 5 | 6 | Mezzanine Floor Enquiry Form

For more information on this product, contact us or call 01553 811977.

Product Downloads

MHS Solutions Range.pdf 8.78MB

Mezzanine Floor Lifter.pdf 1.1MB