|
Typical overview of the Mezzanine
floor lifter:
- TYPE - High Lift Scissor Table
- FIELD OF APPLICATION - Lifting goods
to a second floor (Goods Lift)
- MODEL - TLXY3-40/450-2C
- CAPACITY - 4000KG’s – evenly distributed
- TRAVEL - 1200mm minimum to 5700mm
maximum from floor (4500mm of stroke)
- CLOSED HEIGHT - 1200mm
- PLAN SIZE - 2500mm long x 3500mm
wide overall top platform. The fixed end of the table will
be on the 3500mm side to ensure that when the table is in
the raised position there will be deflection along the whole
length whilst loading table.
- DECKING - Anti slip surface (checker
plate)
- OPERATION - Electro-hydraulic power
unit – built in the table.
- POWER SUPPLY - 400 Volts, 3 phases,
50 Hz
- CONTROL VOLTAGE - 24 Volts with IP55
insulated electrics.
- SPEED - Approximately 100 seconds
to maximum height
- FINISH - RAL To be confirmed.
- LOCATION - Indoors
- CONTROLS - A control panel will be
fitted on both the lower and upper floor.
- SAFETY EDGE - There is a built in
safety function in the safety frame. If the Safety Frame
is touched on its way down, the Lift stops immediately. To
continue lowering, the table has to be raised a little to
be able to lower again.
- HAND RAILS - 1100mm high heavy duty
welded handrails with kick boards, fitted to both 2500mm
sides.
- SAFETY GATES - 1100mm high heavy
duty welded safety gates with kick boards, fitted to both
3500mm sides, outwards opening – saloon type.
- INTERLOCKING GATES - All gates will
be interlocking, which will ensure that the table can not
be operated if the gates on the table or the external gates
are in the open postion.All gates will need to be closed
for the table to raise or lower
- EXTERNAL GATES - The scissor table
will be protected by external gates and rails on both the
lower and upper floors. These gates and rails will be also
be interlocked. Please see attached image at the end of this
quote.
- INSTALLATION - The table will be
installed and commissioned by our engineers and will take
approximately 5 days. The table will be fitted with lifting
eye bolts for easy installation in pit if required.
- EN 1570 - Manufactured to meet all
requirements of current European Standards for scissor lifts.
- GENERAL - The table will be pit mounted
so it is imperative that the pit is built to the tolerances
we recommend.
See more examples... | 2 | 3 | | 5 | 6 | Mezzanine
Floor Enquiry Form
For more information on this product, contact
us or call 01553 811977.
|
